Multi-Directional switching valve chip with the rotary mechanism (3rd report, built-in bias spring mechanism and measurement of valve performance)

Tadahiro Hasegawa, Shunsuke Kinoshita, Hideyuki Takeshima, Koji Ikuta

研究成果: Article査読

1 被引用数 (Scopus)

抄録

This paper describes the improvement of the multi-directional micro switching valve chip with ten outlets. This switching valve chip has a special rotary mechanism, allowing this chip to quickly switch among ten outlets under high pressure (higher than 500 kPa). However, users needed to adjust the positioning of the push-rod against the rotor and the positioning of the bias spring against the plunger, when users utilized the switching valve chip. Therefore, we developed the bias spring mechanism that doesn't need adjustment. The switching valve succeeded to built the bias spring mechanism into the chip. Moreover, the valve performance such as flow rate vs. pressure property was evaluated experimentally.

本文言語English
ページ(範囲)914-921
ページ数8
ジャーナルNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
76
764
DOI
出版ステータスPublished - 2010 4

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

フィンガープリント 「Multi-Directional switching valve chip with the rotary mechanism (3rd report, built-in bias spring mechanism and measurement of valve performance)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル