Non-contact acoustic tests based on nanosecond laser ablation: Generation of a pulse sound source with a small amplitude

Naoki Hosoya, Itsuro Kajiwara, Tatsuo Inoue, Koh Umenai

研究成果: Article

18 引用 (Scopus)

抜粋

A method to generate a pulse sound source for acoustic tests based on nanosecond laser ablation with a plasma plume is discussed. Irradiating a solid surface with a laser beam expands a high-temperature plasma plume composed of free electrons, ionized atoms, etc. at a high velocity throughout ambient air. The shockwave generated by the plasma plume becomes the pulse sound source. A laser ablation sound source has two features. Because laser ablation is induced when the laser fluence reaches 1012-1014 W/m2, which is less than that for laser-induced breakdown (1015 W/m2), laser ablation can generate a lower sound pressure, and the sound source has a hemispherical radiation pattern on the surface where laser ablation is generated. Additionally, another feature is that laser-induced breakdown sound sources can fluctuate, whereas laser ablation sound sources do not because laser ablation is produced at a laser beam-irradiation point. We validate this laser ablation method for acoustic tests by comparing the measured and theoretical resonant frequencies of an impedance tube.

元の言語English
ページ(範囲)4254-4264
ページ数11
ジャーナルJournal of Sound and Vibration
333
発行部数18
DOI
出版物ステータスPublished - 2014 9 1

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Acoustics and Ultrasonics
  • Mechanical Engineering

フィンガープリント Non-contact acoustic tests based on nanosecond laser ablation: Generation of a pulse sound source with a small amplitude' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用