NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.

Hiroshi Tamura; Tadao Onzawa; Susumu Uematsu; Kiyoaki Maekawa

NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.

Hiroshi Tamura, Tadao Onzawa, Susumu Uematsu, Kiyoaki Maekawa

研究成果: Article › 査読

抄録

A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.

本文言語	English
ページ（範囲）	25-30
ページ数	6
ジャーナル	Transactions of the Japan Welding Society
巻	12
号	1
出版ステータス	Published - 1981 1 1
外部発表	はい

ASJC Scopus subject areas

Engineering(all)

他のファイルとリンク

フィンガープリント「NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

@article{6ab88db288e64311b8ecdd57c2f9a0d9,

title = "NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.",

abstract = "A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.",

author = "Hiroshi Tamura and Tadao Onzawa and Susumu Uematsu and Kiyoaki Maekawa",

year = "1981",

month = jan,

day = "1",

language = "English",

volume = "12",

pages = "25--30",

journal = "Transactions of the Japan Welding Society",

issn = "0385-9282",

number = "1",

}

TY - JOUR

T1 - NOTCH TOUGHNESS AND RETAINED AUSTENITE IN 9% NI STEEL WELDS USING FERRITIC FILLER METALS.

AU - Tamura, Hiroshi

AU - Onzawa, Tadao

AU - Uematsu, Susumu

AU - Maekawa, Kiyoaki

PY - 1981/1/1

Y1 - 1981/1/1

N2 - A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.

AB - A recently developed ferritic filler metal of chemical compositions similar to the base metal was used in welding test specimens. Two welds of single- and multi-pass were made to investigate the effect of multiple thermal cycles on retained austenite and toughness. The influence of the austenite on toughness is discussed in detail.

UR - http://www.scopus.com/inward/record.url?scp=0019551557&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0019551557&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0019551557

VL - 12

SP - 25

EP - 30

JO - Transactions of the Japan Welding Society

JF - Transactions of the Japan Welding Society

SN - 0385-9282

IS - 1

ER -