NOTCH TOUGHNESS AND RETAINED AUSTENITE IN SYNTHETIC HAZ OF 9% Ni STEEL.

Hiroshi Tamura, Tadao Onzawa, Susumu Uematsu

研究成果: Article

1 引用 (Scopus)

抜粋

There was a fairly good correlation between the amount of retained austenite and toughness. However, when grains were coarsened by the primary thermal cycle, toughness was no longer improved unless the secondary thermal cycle was above 800 degree C. This secondary thermal cycle resulted in grain refinement and the formation of an enriched zone of alloying elements where stable austenite precipitated in a third thermal cycle, mainly, at prior austenite grain boundaries.

元の言語English
ページ(範囲)51-58
ページ数8
ジャーナルTransactions of the Japan Welding Society
13
発行部数1
出版物ステータスPublished - 1982 1 1

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント NOTCH TOUGHNESS AND RETAINED AUSTENITE IN SYNTHETIC HAZ OF 9% Ni STEEL.' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用