Numerical simulations on beam and/or null forming performance of ESPAR antennas

Akira Akiyama, Koichi Gyoda, Takashi Ohira, Makoto Ando

研究成果: Article

11 引用 (Scopus)

抜粋

The radiation pattern of the ESPAR antenna is controlled by variable reactances loaded to its passive elements. In this paper, the effects of the number of elements and the variable range of the reactance value on the beam and null forming capability are studied by simulation using the method of moments. It is found that a beam with a directivity of more than 8 dBi and a null of less than -40 dBi can be scanned independently in all directions when the number of elements is more than 5 and the reactance value range is ±50 Ω. The reactance range of ±50 Ω is needed for simultaneous forming of a single beam of more than 5 dBi and a single null of less than -30 dBi, while ±100 Ω is needed for simultaneous forming of a single beam of more than 5 dBi and multiple nulls of less than -15 dBi. The direction of the beam and null can be close as the number of elements is increased. The input impedance of the feed element is also studied and the standard return loss of a seven-element antenna is found to be 15.8 dBi.

元の言語English
ページ(範囲)1-11
ページ数11
ジャーナルElectronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)
86
発行部数12
DOI
出版物ステータスPublished - 2003 7 17
外部発表Yes

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering

フィンガープリント Numerical simulations on beam and/or null forming performance of ESPAR antennas' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用