Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression

Naoyuki Kubota; Kousuke Saito; Yoshihiko Hangai; Takao Utsunomiya; Tsuneaki Ishima; Hisanobu Kawashima; Osamu Kuwazuru; Nobuhiro Yoshikawa

doi:10.1299/kikaia.79.1076

Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression

Naoyuki Kubota, Kousuke Saito, Yoshihiko Hangai, Takao Utsunomiya, Tsuneaki Ishima, Hisanobu Kawashima, Osamu Kuwazuru, Nobuhiro Yoshikawa

機械工学科

研究成果: Article › 査読

抄録

Porous aluminum is a lightweight material with high energy absorption properties. In this study, impact test of A1050-ADC12 functionally graded porous aluminum fabricated by friction stir processing (FSP) route was carried out. It was shown that deformation began from low strength A1050 layer and thereafter high strength ADC12 layer deformed. This result is consistent with the result of static compression test of A1050-ADC12 functionally graded porous aluminum. Consequently, it was shown that A1050-ADC12 functionally graded porous aluminum has the potential for its location of deformation to be controlled.

本文言語	English
ページ（範囲）	1076-1078
ページ数	3
ジャーナル	Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
巻	79
号	804
DOI	https://doi.org/10.1299/kikaia.79.1076
出版ステータス	Published - 2013

ASJC Scopus subject areas

Materials Science(all)
Mechanics of Materials
Mechanical Engineering

文献へのアクセス

10.1299/kikaia.79.1076

フィンガープリント「Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

Kubota, N., Saito, K., Hangai, Y., Utsunomiya, T., Ishima, T., Kawashima, H., Kuwazuru, O., & Yoshikawa, N. (2013). Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression. Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 79(804), 1076-1078. https://doi.org/10.1299/kikaia.79.1076

Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression. / Kubota, Naoyuki; Saito, Kousuke; Hangai, Yoshihiko; Utsunomiya, Takao; Ishima, Tsuneaki; Kawashima, Hisanobu; Kuwazuru, Osamu; Yoshikawa, Nobuhiro.

In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, Vol. 79, No. 804, 2013, p. 1076-1078.

研究成果: Article › 査読

Kubota, N, Saito, K, Hangai, Y, Utsunomiya, T, Ishima, T, Kawashima, H, Kuwazuru, O & Yoshikawa, N 2013, 'Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression', Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, vol. 79, no. 804, pp. 1076-1078. https://doi.org/10.1299/kikaia.79.1076

Kubota, Naoyuki ; Saito, Kousuke ; Hangai, Yoshihiko ; Utsunomiya, Takao ; Ishima, Tsuneaki ; Kawashima, Hisanobu ; Kuwazuru, Osamu ; Yoshikawa, Nobuhiro. / Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression. In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 2013 ; Vol. 79, No. 804. pp. 1076-1078.

@article{fa2692b0376c4d06b01ce18f1495dc19,

title = "Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression",

abstract = "Porous aluminum is a lightweight material with high energy absorption properties. In this study, impact test of A1050-ADC12 functionally graded porous aluminum fabricated by friction stir processing (FSP) route was carried out. It was shown that deformation began from low strength A1050 layer and thereafter high strength ADC12 layer deformed. This result is consistent with the result of static compression test of A1050-ADC12 functionally graded porous aluminum. Consequently, it was shown that A1050-ADC12 functionally graded porous aluminum has the potential for its location of deformation to be controlled.",

keywords = "Aluminum alloy, Foam, Friction stir processing, Functionally graded material, Impact test, Porous material",

author = "Naoyuki Kubota and Kousuke Saito and Yoshihiko Hangai and Takao Utsunomiya and Tsuneaki Ishima and Hisanobu Kawashima and Osamu Kuwazuru and Nobuhiro Yoshikawa",

year = "2013",

doi = "10.1299/kikaia.79.1076",

language = "English",

volume = "79",

pages = "1076--1078",

journal = "Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A",

issn = "0387-5008",

publisher = "Japan Society of Mechanical Engineers",

number = "804",

}

TY - JOUR

T1 - Observation of the fracture behavior in A1050-ADC12 functionally graded porous aluminum under impact compression

AU - Kubota, Naoyuki

AU - Saito, Kousuke

AU - Hangai, Yoshihiko

AU - Utsunomiya, Takao

AU - Ishima, Tsuneaki

AU - Kawashima, Hisanobu

AU - Kuwazuru, Osamu

AU - Yoshikawa, Nobuhiro

PY - 2013

Y1 - 2013

N2 - Porous aluminum is a lightweight material with high energy absorption properties. In this study, impact test of A1050-ADC12 functionally graded porous aluminum fabricated by friction stir processing (FSP) route was carried out. It was shown that deformation began from low strength A1050 layer and thereafter high strength ADC12 layer deformed. This result is consistent with the result of static compression test of A1050-ADC12 functionally graded porous aluminum. Consequently, it was shown that A1050-ADC12 functionally graded porous aluminum has the potential for its location of deformation to be controlled.

AB - Porous aluminum is a lightweight material with high energy absorption properties. In this study, impact test of A1050-ADC12 functionally graded porous aluminum fabricated by friction stir processing (FSP) route was carried out. It was shown that deformation began from low strength A1050 layer and thereafter high strength ADC12 layer deformed. This result is consistent with the result of static compression test of A1050-ADC12 functionally graded porous aluminum. Consequently, it was shown that A1050-ADC12 functionally graded porous aluminum has the potential for its location of deformation to be controlled.

KW - Aluminum alloy

KW - Foam

KW - Friction stir processing

KW - Functionally graded material

KW - Impact test

KW - Porous material

UR - http://www.scopus.com/inward/record.url?scp=84885202205&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84885202205&partnerID=8YFLogxK

U2 - 10.1299/kikaia.79.1076

DO - 10.1299/kikaia.79.1076

M3 - Article

AN - SCOPUS:84885202205

VL - 79

SP - 1076

EP - 1078

JO - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

JF - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

SN - 0387-5008

IS - 804

ER -