Performance of low cost 3D printed minimum quantity lubrication applicator using palm oil in milling steel

Abang Mohammad Nizam Abang Kamaruddin, Abdullah Yassin, Shahrol Mohamaddan, Syaiful Anwar Rajaie, Muhammad Isyraf Mazlan, Steven Joel Total, Ridhwan Shah Busrah

研究成果: Conference contribution

抜粋

One of the most significant factors in machining process or metal cutting is the cutting tool performance. The rapid wear rate of cutting tools and cutting forces expend due to high cutting temperature is a critical problem to be solved in high-speed machining process, milling. Near-dry machining such as minimum quantity lubrication (MQL) is regarded as one of the solutions to solve this problem. However, the function of MQL in milling process is still uncertain so far which prevents MQL from widely being utilized in this specific machining process. In this paper, the mechanism of cutting tool performance such as tool wear and cutting forces in MQL assisted milling is investigated more comprehensively and the results are compared in three different cutting conditions which is dry cutting, wet cutting (flooding) and MQL. The MQL applicator is constructed from a household grade low-cost 3D printing technique. The chips surface of chips formation in each cutting condition is also observed using Scanning Electron Microscopy (SEM) machine. It is found out that wet cutting (flooding) is the best cutting performance compare to MQL and dry cutting. However, it can also be said that wet cutting and MQL produced almost the same value of tool wear and cutting forces as there is negligible differences in average tool wear and cutting forces between them based on the experiment conducted.

元の言語English
ホスト出版物のタイトルInnovative Engineering and Technology II
編集者Md. Rezaur Rahman, Siti Noor Linda binti Taib, Norhuzaimin Bin Julai
出版者Trans Tech Publications Ltd
ページ85-92
ページ数8
ISBN(印刷物)9783035713930
DOI
出版物ステータスPublished - 2020
外部発表Yes
イベントInternational UNIMAS Engineering Conference on Advanced Materials, ENCON 2018 - Kuching, Malaysia
継続期間: 2018 9 122018 9 14

出版物シリーズ

名前Materials Science Forum
997 MSF
ISSN(印刷物)0255-5476
ISSN(電子版)1662-9752

Conference

ConferenceInternational UNIMAS Engineering Conference on Advanced Materials, ENCON 2018
Malaysia
Kuching
期間18/9/1218/9/14

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Performance of low cost 3D printed minimum quantity lubrication applicator using palm oil in milling steel' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Kamaruddin, A. M. N. A., Yassin, A., Mohamaddan, S., Rajaie, S. A., Mazlan, M. I., Total, S. J., & Busrah, R. S. (2020). Performance of low cost 3D printed minimum quantity lubrication applicator using palm oil in milling steel. : M. R. Rahman, S. N. Linda binti Taib, & N. Bin Julai (版), Innovative Engineering and Technology II (pp. 85-92). (Materials Science Forum; 巻数 997 MSF). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.997.85