Press forming of aluminum foam during foaming using pin screen mold

Yoshihiko Hangai, Takumi Tomaru, Masataka Ohashi, Kenji Amagai, Takao Utsunomiya, Nobuhiro Yoshkawa

研究成果: Article査読


The precursor foaming process is one of the fabrication processes used for the fabrication of aluminum foam. In this study, the shaping of the aluminum foam was conducted by press forming during foaming precursor. A pin screen mold was proposed for the die of the press forming. It was shown that the pin screen mold could be used for the die of the press forming of the aluminum foam, and star-shaped aluminum foam can be obtained. From X-ray computed tomography (CT) observation, there is little effect of press forming by using pin screen mold on the pore structures of the obtained aluminum foam.

ジャーナルKeikinzoku/Journal of Japan Institute of Light Metals
出版ステータスPublished - 2020 5 15

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「Press forming of aluminum foam during foaming using pin screen mold」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。