抜粋
A loop printed on a dielectric substrate and fed from a coaxial line can radiate a circularly polarized wave (CPW) when perturbation segments are used. An advantage of printed loop antenna over a circular patch antenna is its smaller circumference, which makes it suitable for use as an array element. In this paper, the fabrication of an array antenna consisting of 90 loops is described, as well as its characteristics. The radiation pattern showed a half-power beam width of 6.5°. An antenna gain of 27.6 dB was realized at 11.85 GHz, which corresponds to a radiation efficiency of 83%. The gain variation was small and the return loss was less than -21 dB.
| 元の言語 | English |
|---|---|
| ページ（範囲） | 504-507 |
| ページ数 | 4 |
| ジャーナル | IEE Conference Publication |
| 巻 | 1 |
| 発行部数 | 407 |
| 出版物ステータス | Published - 1995 |
| 外部発表 | Yes |
| イベント | Proceedings of the 9th International Conference on Antennas and Propagation. Part 2 (of 2) - Eindhoven, Neth 継続期間: 1995 4 4 → 1995 4 7 |
ASJC Scopus subject areas
- Electrical and Electronic Engineering
フィンガープリント Printed loop array antenna radiating a circularly polarised wave' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。
これを引用
Nakano, H., Yoshida, H., Mimaki, H., Yamauchi, J., & Hirose, K. (1995). Printed loop array antenna radiating a circularly polarised wave. IEE Conference Publication, 1(407), 504-507.