Prototype of SC inverter

Kozo Osamura, Akira Sakai, Taketsune Nakamura, Tetsuo Oka, Shinji Fukuda, Sataro Yamaguchi

研究成果: Article

1 引用 (Scopus)

抜粋

At first a function of physical unit "half pair" including superconducting (SC) elements is described. By combining their plural units, a circuit is constructed, which has essential ability for the inverter action. In practice, the YBCO thin films were used for elements of two half-pairs, which connected with the metallic load Z of Rz = 50 μΩ. AC magnetic field between 0.1 and 100 Hz was applied in order to transfer mutual elements from SC state to resistive one. The AC current of 50 Hz was observed on the load Z and its amplitude was Iz,max = 1.0 A when the source DC current of Io = 32 A was applied. Thus the efficiency became 2.8% in this case. When the frequency was 0.2 Hz, the efficiency became 14%. The main reason of the present low efficiency is owing to the resistance of SC elements. IZ,max increased remarkably when the I o increased beyond the critical current of SC elements. The inverter action has been reproduced by the computer simulation under the non-linear conditions on the VI characteristics. The conditions giving high inverter efficiency was made clear. Thus the present results gave clear evidence of SC inverter action.

元の言語English
記事番号5675739
ページ(範囲)1445-1448
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
21
発行部数3 PART 2
DOI
出版物ステータスPublished - 2011 6 1
外部発表Yes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント Prototype of SC inverter' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Osamura, K., Sakai, A., Nakamura, T., Oka, T., Fukuda, S., & Yamaguchi, S. (2011). Prototype of SC inverter. IEEE Transactions on Applied Superconductivity, 21(3 PART 2), 1445-1448. [5675739]. https://doi.org/10.1109/TASC.2010.2093093