Pull-out test of anchor bolt for fastening lead damper to concrete foundation

Hayato Asada, Shoichi Kishiki, Akira Wada

研究成果: Article査読

抄録

Pull-out tests on anchor bolts for fastening lead damper to concrete foundation were conducted to evaluate factors affecting pull-out behavior of anchor bolts. The main parameters were type of anchor bolt commonly used for anchorage of lead damper and layout of reinforcements around anchor bolt. The following results were obtained: (1) Vertical reinforcements arranged around anchor bolt contribute to increase in concrete breakout strength. (2) For long nut type anchor bolt, long nut length covered anchor bolt must be treated with enough care to avoid slipping anchor bolt. Because slipping failure lead to decrease in tensile strength and increase in pull-out displacement at failure. (3) The slope of the concrete cone was much flatter than 45 degree assuming in design procedure, regardless of the embedment depth, anchor type and reinforcement pattern. (4) Based on test results, simple concrete failure model was proposed. Using this model, effective radius of projected area were assessed 0.81le - 0.96le. These values were close to effective radius 1.0 le in existing design formula according to AIJ.

本文言語English
ページ(範囲)661-669
ページ数9
ジャーナルJournal of Structural and Construction Engineering
75
649
DOI
出版ステータスPublished - 2010 3月
外部発表はい

ASJC Scopus subject areas

  • 建築
  • 建築および建設

フィンガープリント

「Pull-out test of anchor bolt for fastening lead damper to concrete foundation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル