Reliability simulation with the finite element analysis (Fea) of redistribution layer in fan-out wafer level packaging

Yuji Okada, Atsushi Fujii, Kenta Ono, Yoshiharu Kariya

研究成果: Article

抜粋

In order to improve the performance and reliability of the package, the interlayer dielectric (Polymer) must not be delaminated and materials should not fracture due to thermal stresses during the operation or the manufacturing process, and the insulation performance between the wiring layers must not be decreased. The critical energy release rate (Gc) of the photosensitive polymer film (2-types of polyimides, polybenzoxazole, and phenolic resin) on the copper were evaluated by the Peel Test. We created material-specific master curves (time–temperature superposition) by considering the measurement results of the Peel Test at the Cu/Polymer interface and the mechanical properties of polymer. In addition, we calculated the energy release rate (G) from finite element analysis (FEA) in FOWLP structure. As a result, the new innovative reliability simulation was made possible by normalizing Gc and G. This study has made it possible to simulate the delamination possibility of Cu/Polymer interface at arbitrary temperatures and displacement rates from basic material data and FEA analysis of the FOWLP structure.

元の言語English
ページ(範囲)171-176
ページ数6
ジャーナルJournal of Photopolymer Science and Technology
33
発行部数2
DOI
出版物ステータスPublished - 2020

ASJC Scopus subject areas

  • Polymers and Plastics
  • Organic Chemistry
  • Materials Chemistry

フィンガープリント Reliability simulation with the finite element analysis (Fea) of redistribution layer in fan-out wafer level packaging' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用