Research on different cooling methods for multi-junction solar cell

Yanqing Zhu, Hualin Huang, Jifu Shi, Yipu Kang, Gang Xu, Lei Miao, Chunsheng Li

研究成果: Article査読

抄録

Under three different cooling methods, such as without cooling method, passive aluminum heat sink and composite heat sink system, the output characteristics of GaAs multi-junction solar cell under different concentration ratio were tested and analyzed based on the method of sun-light sources simulation. The experiment results show that the test results consist with the I-V characteristic equation. For the concentration ratio of 500, the cell efficiency under composite heat sink system is 34.30%, which is 2.79% higher than that under passive aluminum heat sink and 4.03% higher than without cooling method. The analyzing results show that GaAs multi-junction solar cells need cooling device. The composite heat sink system can be used for concentration ratio higher than 100, and the passive aluminum heat sink can be used for concentration ratio less than 100.

本文言語English
ページ(範囲)2438-2443
ページ数6
ジャーナルTaiyangneng Xuebao/Acta Energiae Solaris Sinica
35
12
出版ステータスPublished - 2014 12 1
外部発表はい

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology

フィンガープリント 「Research on different cooling methods for multi-junction solar cell」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル