Resonance frequency of carriages for linear roller guides

Yasunori Sakai; Masaomi Tsutsumi

Resonance frequency of carriages for linear roller guides

研究成果: Paper › 査読

抄録

This paper describes the vibration responses of a single carriage from a linear roller guide. These responses were detected by an accelerometer and were analyzed by an FFT analyzer. From the experimental results, it was found that the number of rollers contacting the carriage raceway governs the resonance frequency. In addition, the surface profile of each carriage raceway was measured using a surface profile measuring instrument. It was determined that the raceway surface profile may also influence the resonance frequency of the carriage.

本文言語	English
出版ステータス	Published - 2011 12 1
外部発表	はい
イベント	6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011 - Omiya Sonic City, Saitama, Japan 継続期間: 2011 11 8 → 2011 11 10

Conference

Conference	6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011
国/地域	Japan
City	Omiya Sonic City, Saitama
Period	11/11/8 → 11/11/10

ASJC Scopus subject areas

産業および生産工学

他のファイルとリンク

引用スタイル

@conference{94b122219eda42f9b802d8e97fecff22,

title = "Resonance frequency of carriages for linear roller guides",

abstract = "This paper describes the vibration responses of a single carriage from a linear roller guide. These responses were detected by an accelerometer and were analyzed by an FFT analyzer. From the experimental results, it was found that the number of rollers contacting the carriage raceway governs the resonance frequency. In addition, the surface profile of each carriage raceway was measured using a surface profile measuring instrument. It was determined that the raceway surface profile may also influence the resonance frequency of the carriage.",

keywords = "Carriage, Frequency response, Impulse excitation, Linear roller guide, Raceway profile, Resonance frequency",

author = "Yasunori Sakai and Masaomi Tsutsumi",

year = "2011",

month = dec,

day = "1",

language = "English",

note = "6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011 ; Conference date: 08-11-2011 Through 10-11-2011",

}

TY - CONF

T1 - Resonance frequency of carriages for linear roller guides

AU - Sakai, Yasunori

AU - Tsutsumi, Masaomi

PY - 2011/12/1

Y1 - 2011/12/1

N2 - This paper describes the vibration responses of a single carriage from a linear roller guide. These responses were detected by an accelerometer and were analyzed by an FFT analyzer. From the experimental results, it was found that the number of rollers contacting the carriage raceway governs the resonance frequency. In addition, the surface profile of each carriage raceway was measured using a surface profile measuring instrument. It was determined that the raceway surface profile may also influence the resonance frequency of the carriage.

AB - This paper describes the vibration responses of a single carriage from a linear roller guide. These responses were detected by an accelerometer and were analyzed by an FFT analyzer. From the experimental results, it was found that the number of rollers contacting the carriage raceway governs the resonance frequency. In addition, the surface profile of each carriage raceway was measured using a surface profile measuring instrument. It was determined that the raceway surface profile may also influence the resonance frequency of the carriage.

KW - Carriage

KW - Frequency response

KW - Impulse excitation

KW - Linear roller guide

KW - Raceway profile

KW - Resonance frequency

UR - http://www.scopus.com/inward/record.url?scp=84883359587&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883359587&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84883359587

T2 - 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011

Y2 - 8 November 2011 through 10 November 2011

ER -

Resonance frequency of carriages for linear roller guides

抄録

Conference

ASJC Scopus subject areas

他のファイルとリンク

フィンガープリント

引用スタイル