Room temperature operation of all-solid-state battery using a closo-type complex hydride solid electrolyte and a LiCoO2 cathode by interfacial modification

Sangryun Kim, Kentaro Harada, Naoki Toyama, Hiroyuki Oguchi, Kazuaki Kisu, Shin ichi Orimo

研究成果: Article査読

6 被引用数 (Scopus)

抄録

We report on an all-solid-state battery that employs a closo-type complex hydride solid electrolyte and a LiCoO2 cathode. Interfacial modification between the solid electrolyte and cathode with a LiNbO3 buffer layer enables reversible charge-discharge cycling with a cell voltage of 3.9 V (vs. Li+/Li) at room temperature. Electrochemical analyses clarify that the given modification effectively suppresses side reactions at the cathode/solid electrolyte interface. The interfacial resistance is lowered by ca. 10 times with a 5 nm thick LiNbO3 buffer layer compared to that without a buffer layer, so that a discharge capacity of 109 mAh g−1 is achieved. These results suggest that interfacial modification can be a viable approach to the development of high-voltage all-solid-state batteries using closo-type complex hydride solid electrolytes and oxide cathodes.

本文言語English
ページ(範囲)47-51
ページ数5
ジャーナルJournal of Energy Chemistry
43
DOI
出版ステータスPublished - 2020 4
外部発表はい

ASJC Scopus subject areas

  • Fuel Technology
  • Energy Engineering and Power Technology
  • Energy (miscellaneous)
  • Electrochemistry

フィンガープリント 「Room temperature operation of all-solid-state battery using a closo-type complex hydride solid electrolyte and a LiCoO<sub>2</sub> cathode by interfacial modification」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル