Rotational accuracy of superconducting magnetic bearings

Hiromasa Fukuyama, Kazutoshi Seki, Takeshi Takizawa, Shigeru Endou, Masato Murakami, Hiroshi Takaichi

研究成果: Article査読

抄録

Analytical and experimental study of rotational accuracy of superconducting magnetic bearings depending on the arrangements of permanent magnets is presented in this paper. With the aim of improving the rotational accuracy, the axial bearing magnet ring was divided into two rings in the radial direction and the radial bearing magnet sleeve was divided into three stacked rings in the axial direction. As a result, the magnetic flux density could be increased at the superconductor ring position, the static stiffness and the load capacity were increased, and hysteresis became large. Concerning the dynamic characteristics, the rotational accuracy of the shaft was improved remarkably and the shaft weighing 2.4 kg could rotate within 15μm peak to peak at 12 000 rpm.

本文言語English
ページ(範囲)270-275
ページ数6
ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
62
593
DOI
出版ステータスPublished - 1996
外部発表はい

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 産業および生産工学

フィンガープリント

「Rotational accuracy of superconducting magnetic bearings」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル