金網金型による発泡アルミニウム発泡時の形状付与

Yoshihiko Hangai, Nozomi Tsurumi, Kenji Amagai, Takao Utsunomiya, Nobuhiro Yoshikawa

研究成果: Article

3 引用 (Scopus)

抜粋

In this study, a stainless steel mesh was used as a mold for fabricating aluminum foam with a complex shape during the foaming of a precursor by employing optical heating. From the foaming of the precursor in stainless steel mesh molds with the shapes of an airplane and vehicle, it was shown that aluminum foam with similar shapes to the stainless steel mesh mold can be obtained. No protrusion of the aluminum foam through the mesh openings was observed. A mesh pattern was transferred to the surface of the aluminum foam when a rough mesh was used. In contrast, aluminum foam with a smooth surface was obtained when a fine mesh was used.

元の言語Japanese
ページ(範囲)484-486
ページ数3
ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
82
発行部数12
DOI
出版物ステータスPublished - 2018 1 1

    フィンガープリント

Keywords

  • Cellular materials
  • Foaming
  • Mold
  • Optical heating
  • Precursor

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

これを引用