Shear extrusion method of Bi-Te based thermoelectric material

Yasushi Iwaisako, Tatsuhiko Aizawa, Atsushi Yamamoto, Toshitaka Ohta

研究成果: Article査読

3 被引用数 (Scopus)

抄録

For improvement of the figure of merit in Bi-Te system, anisotropic microstructure control becomes very important with grain size refinement. The conventional powder compaction processes are mostly ineffective or inefficient in texture control. New alternative processing is strongly awaited to make anisotropic microstructure control for enhancement of thermoelectric properties. In this study, the shear extrusion processing was proposed to make texture control in Bi0.4Sb1.6Te3 alloyment from green compact. In this method, strong shear strain is applied to the sample, resulting in selective shear deformation along the cleavage crystal surface and rearrangement of crystalline orientations through the extrusion passage. As the result, the electrical resistivity of sheared sample was improved from 2.11×10-5 (Ωm) to 1.17×10-5 (Ωm) without decrease of Seebeck coefficient. Then, higher power factor of 4.09×10-3 (W/mK2) can be achieved.

本文言語English
ページ(範囲)1189-1193
ページ数5
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
47
11
DOI
出版ステータスPublished - 2000 11

ASJC Scopus subject areas

  • 機械工学
  • 産業および生産工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Shear extrusion method of Bi-Te based thermoelectric material」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル