Simultaneous printing of multiple origami structures

Hiroki Shigemune, Shigeki Sugano, Shingo Maeda, Shuji Hashimoto

研究成果: Conference contribution

抄録

We developed a self-folding method of a printed paper. The paper self-folds along the printed line with a desktop inkjet printer to get 3D structure. In this paper, we introduce a method to fabricate multiple 3D structures simultaneously. Multiple development designs were arranged on A4 sized paper, and the A4 sized paper is printed to self-fold multiple developments. The proposed method has an advantage especially in small scale, because when design of the development is smaller, more numbers of structures can place in A4 sized paper and construct. Plenty of small and light 3D structures are fabricated simultaneously with low-cost. The feature has good affinity with swarm robotics, and many paper robots may locomote using their own structural intelligence obtained by the self-folding.

本文言語English
ホスト出版物のタイトルMHS 2017 - 28th 2017 International Symposium on Micro-NanoMechatronics and Human Science
出版社Institute of Electrical and Electronics Engineers Inc.
ページ1-2
ページ数2
2018-January
ISBN(電子版)9781538633144
DOI
出版ステータスPublished - 2018 2 28
イベント28th International Symposium on Micro-NanoMechatronics and Human Science, MHS 2017 - Nagoya, Japan
継続期間: 2017 12 32017 12 6

Other

Other28th International Symposium on Micro-NanoMechatronics and Human Science, MHS 2017
国/地域Japan
CityNagoya
Period17/12/317/12/6

ASJC Scopus subject areas

  • バイオテクノロジー
  • 生体医工学
  • 電子工学および電気工学
  • 機械工学

フィンガープリント

「Simultaneous printing of multiple origami structures」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル