SINGLE-MODE 1 multiplied by 50 SWITCH FOR 10-FIBER RIBBON.

Toshiaki Satake, Shinji Nagasawa, Norio Kashima

研究成果: Article査読

4 被引用数 (Scopus)

抄録

Single-mode 1 multiplied by N switch for 10-fiber ribbon has been developed. The switch has a movable 10-fiber connector plug and linear arrangement of 10-fiber plugs to be mated. The plugs are precisely aligned by inserting alignment pins. The tested 1 multiplied by 50 switch exhibits an average insertion loss of 0. 5 db for single-mode optical fibers with 10 mu m core. The minimum and the maximum switching times are 17 msec for port 1 to 2 and 80 msec for port 1 to 50, respectively. Insertion loss change after over 1000 times switching is less than 0. 1 db.

本文言語English
ページ(範囲)623-624
ページ数2
ジャーナルTransactions of the Institute of Electronics, Information and Communication Engineers, Section E (
E70
7
出版ステータスPublished - 1987 7 1

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「SINGLE-MODE 1 multiplied by 50 SWITCH FOR 10-FIBER RIBBON.」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル