Solid-state synthesis of Mg2Ni by the bulk mechanical alloying

Tatsuhiko Aizawa, Toshiro Kuji, Hiroaki Nakano, Ken Ichi Ichige

研究成果: Article査読

5 被引用数 (Scopus)

抄録

Mg2Ni alloy has been and is still highlighted as a candidate hydrogen storage material to be working instead of LaNi5, which is a typical commercial material at present. This alloy is superior to other hydrogen storage alloys with respect to hydrogen absorbing capacity, light weight, long-life usage as a battery and adaptivity to Ni-Cd type batteries. New processing is required to make precise control of chemical composition in alloying, to reduce absorbing temperature of hydrogen and to avoid from various contaminations. In the present study, the bulk mechanical alloying is applied to solid-state synthesis of Mg2Ni alloys instead of the milling-type mechanical alloying or the conventional P/M approaches. The present method is favored for the precise control of chemical composition within the tolerance of 1% or less, the fabrication of dense green compact of Mg2Ni, which prevents itself from burning or oxidation and, the microstructure control to yield nano-grained powder compact. Furthermore, low temperature phase can be available to lower hydrogen absorbing temperature. XRD, TEM and Sievert method are utilized to make characterization of the synthesized Mg2Ni and to evaluate its thermo-dynamic properties, respectively.

本文言語English
ページ(範囲)1097-1102
ページ数6
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
46
10
DOI
出版ステータスPublished - 1999 10

ASJC Scopus subject areas

  • 機械工学
  • 産業および生産工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Solid-state synthesis of Mg<sub>2</sub>Ni by the bulk mechanical alloying」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル