SrCe0.9In0.1O3-δ-based reversible symmetrical Protonic Ceramic Cell

Wojciech Skubida, Kun Zheng, Anna Stępień, Konrad Świerczek, Alicja Klimkowicz

研究成果: Article査読

抄録

In-doped SrCe0.9In0.1O3-δ (SCI) perovskite-type oxide is utilized as the solid electrolyte, as well as a component, together with SrFe0.75Mo0.25O3-δ (SFM) compound, in the composite-type electrodes to construct symmetrical Protonic Ceramic Fuel Cells (PCFC). With good mutual stability of SCI and SFM at high temperatures in water vapor-containing reducing and oxidizing conditions, as well as sufficient ionic conductivity with high proton transference number of SrCe0.9In0.1O3-δ, and high electronic conduction of SrFe0.75Mo0.25O3-δ, effectiveness of the electrochemical reactions is ensured. It is documented that 80:20 wt.% SFM-SCI electrode performs better, comparing to the one having 50:50 wt.% ratio of both compounds, with both electrodes showing lower polarization resistance values in the reducing conditions. Symmetrical SCI-SFM|SCI|SCI-SFM cells can be operated in normal (PCFC) and reversed, Protonic Ceramic Electrolyzer Cell (PCEC) mode, showing similar shape of current density-voltage characteristics. The maximum obtained power density is 32 mW cm−2 at 800 °C.

本文言語English
論文番号111154
ジャーナルMaterials Research Bulletin
135
DOI
出版ステータスPublished - 2021 3

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「SrCe<sub>0.9</sub>In<sub>0.1</sub>O<sub>3-δ</sub>-based reversible symmetrical Protonic Ceramic Cell」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル