Steel powder compaction and forming analysis

Shigeyuki Tamura, Tatsuhiko Aizawa, Takao Mitsuno, Junji Kihara

研究成果: Article

3 引用 (Scopus)

抄録

Quality improvement of P/M parts requires a precise description and prediction of the mechanical behavior of the complete P/M process from powder design, through powder compaction and forming, to sintering. Our granular modeling approach treats the powders as on assembly of discrete elements and can describe the mechanical state of the powder in the forming process, For verification, two modes of powder forming were chosen; in these analyses, the powder flow pattern and density distribution were predicted quantitatively and evaluated through comparison with experimental results.

元の言語English
ページ(範囲)50-59
ページ数10
ジャーナルInternational Journal of Powder Metallurgy (Princeton, New Jersey)
34
発行部数1
出版物ステータスPublished - 1998 1
外部発表Yes

Fingerprint

Steel
Powders
Compaction
Flow patterns
Sintering

ASJC Scopus subject areas

  • Metals and Alloys

これを引用

Tamura, S., Aizawa, T., Mitsuno, T., & Kihara, J. (1998). Steel powder compaction and forming analysis. International Journal of Powder Metallurgy (Princeton, New Jersey), 34(1), 50-59.

Steel powder compaction and forming analysis. / Tamura, Shigeyuki; Aizawa, Tatsuhiko; Mitsuno, Takao; Kihara, Junji.

:: International Journal of Powder Metallurgy (Princeton, New Jersey), 巻 34, 番号 1, 01.1998, p. 50-59.

研究成果: Article

Tamura, S, Aizawa, T, Mitsuno, T & Kihara, J 1998, 'Steel powder compaction and forming analysis', International Journal of Powder Metallurgy (Princeton, New Jersey), 巻. 34, 番号 1, pp. 50-59.
Tamura, Shigeyuki ; Aizawa, Tatsuhiko ; Mitsuno, Takao ; Kihara, Junji. / Steel powder compaction and forming analysis. :: International Journal of Powder Metallurgy (Princeton, New Jersey). 1998 ; 巻 34, 番号 1. pp. 50-59.
@article{942cd486a8974f0392959cda84e845a3,
title = "Steel powder compaction and forming analysis",
abstract = "Quality improvement of P/M parts requires a precise description and prediction of the mechanical behavior of the complete P/M process from powder design, through powder compaction and forming, to sintering. Our granular modeling approach treats the powders as on assembly of discrete elements and can describe the mechanical state of the powder in the forming process, For verification, two modes of powder forming were chosen; in these analyses, the powder flow pattern and density distribution were predicted quantitatively and evaluated through comparison with experimental results.",
author = "Shigeyuki Tamura and Tatsuhiko Aizawa and Takao Mitsuno and Junji Kihara",
year = "1998",
month = "1",
language = "English",
volume = "34",
pages = "50--59",
journal = "International Journal of Powder Metallurgy (Princeton, New Jersey)",
issn = "0888-7462",
publisher = "American Powder Metallurgy Institute",
number = "1",

}

TY - JOUR

T1 - Steel powder compaction and forming analysis

AU - Tamura, Shigeyuki

AU - Aizawa, Tatsuhiko

AU - Mitsuno, Takao

AU - Kihara, Junji

PY - 1998/1

Y1 - 1998/1

N2 - Quality improvement of P/M parts requires a precise description and prediction of the mechanical behavior of the complete P/M process from powder design, through powder compaction and forming, to sintering. Our granular modeling approach treats the powders as on assembly of discrete elements and can describe the mechanical state of the powder in the forming process, For verification, two modes of powder forming were chosen; in these analyses, the powder flow pattern and density distribution were predicted quantitatively and evaluated through comparison with experimental results.

AB - Quality improvement of P/M parts requires a precise description and prediction of the mechanical behavior of the complete P/M process from powder design, through powder compaction and forming, to sintering. Our granular modeling approach treats the powders as on assembly of discrete elements and can describe the mechanical state of the powder in the forming process, For verification, two modes of powder forming were chosen; in these analyses, the powder flow pattern and density distribution were predicted quantitatively and evaluated through comparison with experimental results.

UR - http://www.scopus.com/inward/record.url?scp=0347692720&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0347692720&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0347692720

VL - 34

SP - 50

EP - 59

JO - International Journal of Powder Metallurgy (Princeton, New Jersey)

JF - International Journal of Powder Metallurgy (Princeton, New Jersey)

SN - 0888-7462

IS - 1

ER -