TY - GEN

T1 - Study of elastic moduli of sintered low alloy steels by acoustic pulse method

AU - Hirose, Norimitsu

AU - Oouchi, Kazuya

AU - Fujiki, Akira

AU - Asami, Junichi

PY - 2007

Y1 - 2007

N2 - The influence of porosity (P) on Young's modulus (E) and Poisson's ratio (u) of sintered steels produced from four types of steel powders were investigated. The values of E and v depends mainly on the value of P, and those were a little affected by alloying elements. The relationship between compacting pressure (CP) and P and the relationships between E, v, and P were described as following equations: P = P1 + P2 exp(- CP / P 3), E = E0 (1 - kEP)2, and v = (v0 - vsub)(l - kvP)2 + v sub, where subscript 0 means P = 0, and P1-3, k E, kv and vsub were empirical constants. It was clarified that if powder and sintering temperature is defined, the elastic moduli of sintered steel can be calculated as a function of compacting pressure.

AB - The influence of porosity (P) on Young's modulus (E) and Poisson's ratio (u) of sintered steels produced from four types of steel powders were investigated. The values of E and v depends mainly on the value of P, and those were a little affected by alloying elements. The relationship between compacting pressure (CP) and P and the relationships between E, v, and P were described as following equations: P = P1 + P2 exp(- CP / P 3), E = E0 (1 - kEP)2, and v = (v0 - vsub)(l - kvP)2 + v sub, where subscript 0 means P = 0, and P1-3, k E, kv and vsub were empirical constants. It was clarified that if powder and sintering temperature is defined, the elastic moduli of sintered steel can be calculated as a function of compacting pressure.

KW - Diffusion bonded powder

KW - P/M machine part

KW - Poisson's ratio

KW - Prealloyed powder

KW - Young's modulus

UR - http://www.scopus.com/inward/record.url?scp=38349124815&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=38349124815&partnerID=8YFLogxK

U2 - 10.4028/0-87849-419-7.749

DO - 10.4028/0-87849-419-7.749

M3 - Conference contribution

AN - SCOPUS:38349124815

SN - 0878494197

SN - 9780878494194

T3 - Materials Science Forum

SP - 749

EP - 752

BT - Progress in Powder Metallurgy - Proceedings of the 2006 Powder Metallurgy World Congress and Exhibition (PM 2006)

PB - Trans Tech Publications Ltd

T2 - 2006 Powder Metallurgy World Congress and Exhibition, PM 2006

Y2 - 24 September 2006 through 28 September 2006

ER -