抄録
Two blocks of single grain Y-Ba-Cu-O superconductors were welded with various solder materials that have lower decomposition temperature than that of Y-Ba-Cu-O superconductors. Microstructural analyses revealed that no segregation of the secondary phase and/or the residual liquid phase was observed at the joint when the (110) surfaces were directed parallel to the welded region. We also found that Y-Ba-Cu-O joined with a sintered Y-Ba-Cu-O/Ag bar exhibited the strongest coupling.
| 元の言語 | English |
|---|---|
| ページ（範囲） | 260-266 |
| ページ数 | 7 |
| ジャーナル | Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals |
| 巻 | 66 |
| 発行部数 | 4 |
| 出版物ステータス | Published - 2002 4 |
| 外部発表 | Yes |
Fingerprint
ASJC Scopus subject areas
- Metals and Alloys
これを引用
Superconducting joint of Y-Ba-Cu-O using various superconducting solders. / Iida, Kazumasa; Yoshioka, Junko; Negichi, Tomokazu; Sakai, Naomichi; Noto, Koshichi; Murakami, Masato.
：: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 巻 66, 番号 4, 04.2002, p. 260-266.研究成果: Article
}
TY - JOUR
T1 - Superconducting joint of Y-Ba-Cu-O using various superconducting solders
AU - Iida, Kazumasa
AU - Yoshioka, Junko
AU - Negichi, Tomokazu
AU - Sakai, Naomichi
AU - Noto, Koshichi
AU - Murakami, Masato
PY - 2002/4
Y1 - 2002/4
N2 - Two blocks of single grain Y-Ba-Cu-O superconductors were welded with various solder materials that have lower decomposition temperature than that of Y-Ba-Cu-O superconductors. Microstructural analyses revealed that no segregation of the secondary phase and/or the residual liquid phase was observed at the joint when the (110) surfaces were directed parallel to the welded region. We also found that Y-Ba-Cu-O joined with a sintered Y-Ba-Cu-O/Ag bar exhibited the strongest coupling.
AB - Two blocks of single grain Y-Ba-Cu-O superconductors were welded with various solder materials that have lower decomposition temperature than that of Y-Ba-Cu-O superconductors. Microstructural analyses revealed that no segregation of the secondary phase and/or the residual liquid phase was observed at the joint when the (110) surfaces were directed parallel to the welded region. We also found that Y-Ba-Cu-O joined with a sintered Y-Ba-Cu-O/Ag bar exhibited the strongest coupling.
KW - (110)/(110) joint
KW - Solder
KW - Superconducting joint
KW - YBaCuO bulk superconductor
UR - http://www.scopus.com/inward/record.url?scp=0036542868&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0036542868&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:0036542868
VL - 66
SP - 260
EP - 266
JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
SN - 0021-4876
IS - 4
ER -