Symmetric and asymmetric deformation transition in the regularly cell-structured materials. Part I: Experimental study

Kanyatip Tantikom, Tatsuhiko Aizawa, Toshiji Mukai

研究成果: Article査読

25 被引用数 (Scopus)

抄録

Quasi-static compressive response of regularly cell-structured materials is experimentally studied for various relative density, cell contact length and intercell bonding state. Each cell in this specimen is aligned in a hexagonal closed-pack array. The contact length as well as cell wall thickness of regularly cell-structured materials, plays an important role on the deformation mode transition. The deformation changes itself from symmetric to asymmetric pattern when increasing the contact length to cell-wall thickness ratio. Higher level of collapsing stress is observed in symmetric deformation due to the nearly uniform stress transfer during compression. Work hardening behavior is promoted with increasing the relative density or decreasing the contact length. Asymmetric deformation is associated with a nearly constant collapsing stress. The plateau collapsing stress state is caused by the localized deformation of cell-row in a narrow band of specimen. Liquid epoxy resin between cell walls also on the deformation mode of cell-structured materials. In the present study, the experimental observation is presented first (Part 1), followed by the theoretical analysis and comparison between experimental and analytical results in (Part 2).

本文言語English
ページ(範囲)2199-2210
ページ数12
ジャーナルInternational Journal of Solids and Structures
42
8
DOI
出版ステータスPublished - 2005 4月

ASJC Scopus subject areas

  • モデリングとシミュレーション
  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学
  • 応用数学

フィンガープリント

「Symmetric and asymmetric deformation transition in the regularly cell-structured materials. Part I: Experimental study」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル