Systematic variation of hybrid APCs into YBCO thin films for improving the vortex pinning properties

Alok K. Jha, Kaname Matsumoto, Tomoya Horide, Shrikant Saini, Paolo Mele, Yutaka Yoshida, Satoshi Awaji

研究成果: Article

9 引用 (Scopus)

抄録

The effect of hybrid (columnar and spherical) artificial pinning centers (APCs) on the vortex pinning properties of YBCO thin films is studied in this paper on the basis of variation of critical current density JC with applied magnetic field and also with the orientation of the applied magnetic field. YBCO+BSO3% composite target is used for preparing film with 1-D (columnar) APCs, whereas the same composite target is modified by putting two differently sized (2.2 area% and 3 area%) Y2O3 sectored pieces for preparing films having different concentrations of 3-D (spherical) APCs along with 1-D APCs. Film consisting of only 1-D APCs exhibits enhanced in-fieldJC values as compared to the one without any APC, and the ones consisting of hybrid APCs exhibit even betterJC-B characteristics with increase in the fraction of 3-D APCs. Fpmax. values increase systematically with incorporation of 1-D and 1-D + 3-D APCs, and it also shifts toward higher applied magnetic fields. Film with 1-D APCs exhibits strongJC peak at Θ = 0° (H//c-axis), whereas films consisting of hybrid APCs exhibit enhancedJC at all the investigated angular regime. A possible mechanism of vortex pinning in samples with hybrid APCs is also discussed, suggesting the role of 1-D and 3-D APCs.

元の言語English
記事番号6994222
ジャーナルIEEE Transactions on Applied Superconductivity
25
発行部数3
DOI
出版物ステータスPublished - 2015 6 1
外部発表Yes

Fingerprint

Vortex flow
vortices
Thin films
thin films
Magnetic fields
Composite materials
magnetic fields
composite materials
critical current
current density

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

これを引用

Systematic variation of hybrid APCs into YBCO thin films for improving the vortex pinning properties. / Jha, Alok K.; Matsumoto, Kaname; Horide, Tomoya; Saini, Shrikant; Mele, Paolo; Yoshida, Yutaka; Awaji, Satoshi.

:: IEEE Transactions on Applied Superconductivity, 巻 25, 番号 3, 6994222, 01.06.2015.

研究成果: Article

Jha, Alok K. ; Matsumoto, Kaname ; Horide, Tomoya ; Saini, Shrikant ; Mele, Paolo ; Yoshida, Yutaka ; Awaji, Satoshi. / Systematic variation of hybrid APCs into YBCO thin films for improving the vortex pinning properties. :: IEEE Transactions on Applied Superconductivity. 2015 ; 巻 25, 番号 3.
@article{f79a4a7c43b14ba490740bb59eb44344,
title = "Systematic variation of hybrid APCs into YBCO thin films for improving the vortex pinning properties",
abstract = "The effect of hybrid (columnar and spherical) artificial pinning centers (APCs) on the vortex pinning properties of YBCO thin films is studied in this paper on the basis of variation of critical current density JC with applied magnetic field and also with the orientation of the applied magnetic field. YBCO+BSO3{\%} composite target is used for preparing film with 1-D (columnar) APCs, whereas the same composite target is modified by putting two differently sized (2.2 area{\%} and 3 area{\%}) Y2O3 sectored pieces for preparing films having different concentrations of 3-D (spherical) APCs along with 1-D APCs. Film consisting of only 1-D APCs exhibits enhanced in-fieldJC values as compared to the one without any APC, and the ones consisting of hybrid APCs exhibit even betterJC-B characteristics with increase in the fraction of 3-D APCs. Fpmax. values increase systematically with incorporation of 1-D and 1-D + 3-D APCs, and it also shifts toward higher applied magnetic fields. Film with 1-D APCs exhibits strongJC peak at Θ = 0° (H//c-axis), whereas films consisting of hybrid APCs exhibit enhancedJC at all the investigated angular regime. A possible mechanism of vortex pinning in samples with hybrid APCs is also discussed, suggesting the role of 1-D and 3-D APCs.",
keywords = "Hybrid artificial pinning centers (APCs), thin film, vortex pinning, YBCO",
author = "Jha, {Alok K.} and Kaname Matsumoto and Tomoya Horide and Shrikant Saini and Paolo Mele and Yutaka Yoshida and Satoshi Awaji",
year = "2015",
month = "6",
day = "1",
doi = "10.1109/TASC.2014.2380817",
language = "English",
volume = "25",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

TY - JOUR

T1 - Systematic variation of hybrid APCs into YBCO thin films for improving the vortex pinning properties

AU - Jha, Alok K.

AU - Matsumoto, Kaname

AU - Horide, Tomoya

AU - Saini, Shrikant

AU - Mele, Paolo

AU - Yoshida, Yutaka

AU - Awaji, Satoshi

PY - 2015/6/1

Y1 - 2015/6/1

N2 - The effect of hybrid (columnar and spherical) artificial pinning centers (APCs) on the vortex pinning properties of YBCO thin films is studied in this paper on the basis of variation of critical current density JC with applied magnetic field and also with the orientation of the applied magnetic field. YBCO+BSO3% composite target is used for preparing film with 1-D (columnar) APCs, whereas the same composite target is modified by putting two differently sized (2.2 area% and 3 area%) Y2O3 sectored pieces for preparing films having different concentrations of 3-D (spherical) APCs along with 1-D APCs. Film consisting of only 1-D APCs exhibits enhanced in-fieldJC values as compared to the one without any APC, and the ones consisting of hybrid APCs exhibit even betterJC-B characteristics with increase in the fraction of 3-D APCs. Fpmax. values increase systematically with incorporation of 1-D and 1-D + 3-D APCs, and it also shifts toward higher applied magnetic fields. Film with 1-D APCs exhibits strongJC peak at Θ = 0° (H//c-axis), whereas films consisting of hybrid APCs exhibit enhancedJC at all the investigated angular regime. A possible mechanism of vortex pinning in samples with hybrid APCs is also discussed, suggesting the role of 1-D and 3-D APCs.

AB - The effect of hybrid (columnar and spherical) artificial pinning centers (APCs) on the vortex pinning properties of YBCO thin films is studied in this paper on the basis of variation of critical current density JC with applied magnetic field and also with the orientation of the applied magnetic field. YBCO+BSO3% composite target is used for preparing film with 1-D (columnar) APCs, whereas the same composite target is modified by putting two differently sized (2.2 area% and 3 area%) Y2O3 sectored pieces for preparing films having different concentrations of 3-D (spherical) APCs along with 1-D APCs. Film consisting of only 1-D APCs exhibits enhanced in-fieldJC values as compared to the one without any APC, and the ones consisting of hybrid APCs exhibit even betterJC-B characteristics with increase in the fraction of 3-D APCs. Fpmax. values increase systematically with incorporation of 1-D and 1-D + 3-D APCs, and it also shifts toward higher applied magnetic fields. Film with 1-D APCs exhibits strongJC peak at Θ = 0° (H//c-axis), whereas films consisting of hybrid APCs exhibit enhancedJC at all the investigated angular regime. A possible mechanism of vortex pinning in samples with hybrid APCs is also discussed, suggesting the role of 1-D and 3-D APCs.

KW - Hybrid artificial pinning centers (APCs)

KW - thin film

KW - vortex pinning

KW - YBCO

UR - http://www.scopus.com/inward/record.url?scp=84923915181&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84923915181&partnerID=8YFLogxK

U2 - 10.1109/TASC.2014.2380817

DO - 10.1109/TASC.2014.2380817

M3 - Article

AN - SCOPUS:84923915181

VL - 25

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 3

M1 - 6994222

ER -