The effect of strain rate on the orientation of the fracture plane in a unidirectional polymer matrix composite under transverse compression loading

Michael May, Noah Ledford, Matti Isakov, Philipp Hahn, Hanna Paul, Sumito Nagasawa

研究成果: Article査読

2 被引用数 (Scopus)

抄録

Transverse compression tests on a unidirectional composite were performed under quasi-static and high-rate loading conditions using servo-hydraulic machines as well as a direct impact Hopkinson bar. Aside the expected increase of compressive strength with increasing loading rate, a change of fracture plane orientation was observed. For quasi-static loading conditions, the fracture angle was 54.5°, for high rate-loading conditions this increased to 65°. Assuming a Mohr-Coulomb type of fracture for unidirectional composites under transverse compression loading, the change of fracture plane orientation indicates a rate dependency of the internal friction angle ϕ, which has not previously been reported for composite materials.

本文言語English
論文番号106057
ジャーナルComposites Part A: Applied Science and Manufacturing
138
DOI
出版ステータスPublished - 2020 11
外部発表はい

ASJC Scopus subject areas

  • セラミックおよび複合材料
  • 材料力学

フィンガープリント

「The effect of strain rate on the orientation of the fracture plane in a unidirectional polymer matrix composite under transverse compression loading」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル