The effects of powder type and compacting pressure on the Young's modulus and Poisson's ratio of sintered low alloy steels

Norimitus Hirose, Junichi Asami, Akira Fujiki, Kazuya Oouchi

研究成果: Article査読

1 被引用数 (Scopus)

抄録

In the same sintering and heat-treated conditions, the effects of partially alloyed and prealloyed powders with the different contents of alloying elements and compacting pressure on the Young's modulus (E) and Poisson's ratio (v) of sintered low alloy steels were investigated. The values of E and v depended mainly on the porosity (P) controlled by compacting pressure, and those values were affected slightly by the alloy powder types. The relations of P to E and v were described as the following equations: E = E0 (1-kE · P) 2 and v = 0.034 (1-kv · P)2 + 0.267, where E0 was the value of E at P = 0, and kE and kv were experimental constants that depends on the alloy powder types and sintering temperature.

本文言語English
ページ(範囲)228-132
ページ数97
ジャーナルFenmo Yejin Jishu/Powder Metallurgy Technology
25
3
出版ステータスPublished - 2007 6 1
外部発表はい

ASJC Scopus subject areas

  • Mechanics of Materials
  • Metals and Alloys

フィンガープリント 「The effects of powder type and compacting pressure on the Young's modulus and Poisson's ratio of sintered low alloy steels」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル