Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media

Tsuyoshi Kawanami, Kenichi Togashi, Koji Fumoto, Shigeki Hirano, Peng Zhang, Katsuaki Shirai, Shigeki Hirasawa

研究成果: Article査読

41 被引用数 (Scopus)

抄録

A great deal of attention has been paid to energy saving devices in place of conventional air-cooled and water-cooled devices. The thermal energy storage system that uses the latent heat of a PCM (phase change material) for air-conditioning or heating has recently become popular because it does not require high electric power and it saves energy. An emulsion dispersed nano-size particles of phase change material is produced. We discuss with the thermophysical properties, the stability of emulsion, and the heat transport characteristics as a thermal functional fluid. The testing emulsion, which has nano-size particles as the discrete phase, is produced with a D-phase emulsification method. The diameter of discrete phase in the emulsion is measured for evaluation of the long-term stability of emulsion. In addition, the DSC (differential scanning calorimetry) curve of emulsion is determined. Thermophysical properties such as viscosity and thermal conductivity of emulsions were studied in this work, and was compared with that of the base fluid. The results reveal that the emulsion with the D-phase emulsification method has the superior stability. From the differential thermal analysis, the DSC curve of present emulsion indicates a discontinuous change at the phase change temperature of phase change material due to its latent heat.

本文言語English
ページ(範囲)562-568
ページ数7
ジャーナルEnergy
117
DOI
出版ステータスPublished - 2016 12 15
外部発表はい

ASJC Scopus subject areas

  • 土木構造工学
  • 建築および建設
  • 汚染
  • 機械工学
  • 産業および生産工学
  • 電子工学および電気工学

フィンガープリント

「Thermophysical properties and thermal characteristics of phase change emulsion for thermal energy storage media」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル