Three-dimensional imaging of subsurface delamination in carbon fiber reinforced plastic using photoacoustic wave method

Kazuyuki Nakahata, Keiji Ogi, Koichi Mizukami, Katsumi Ohira, Masayuki Maruyama, Satoshi Wada, Takeshi Namita, Tsuyoshi Shiina

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Ultrasonic wave generated by interaction of the material with pulsed lasers is known as photoacoustic (PA) wave. In this study, the PA imaging is applied to the nondestructive testing for carbon fiber reinforced plastic (CFRP). When subsurface flaws are in CFRP, the detection of the flaws is sometimes challenging because the trailing signal from the surface interferes with the scattered signal from the flaws. Here, we developed a PA microscopy (PAM) to reconstruct the location and shape of the subsurface flaws. The PAM employs a confocal arrangement of optical and acoustic lens to maximize the intensity of generated PA waves. To enhance the lateral resolution of the image, we introduced the synthetic aperture focusing technique (SAFT). In the SAFT, it is necessary to consider direction-dependent group velocities due to the strong anisotropy in CFRP. The performance of the PA imaging combined with the SAFT was checked with artificial delaminations in a cross-ply CFRP specimen. It was shown that the PA wave had a wide frequency band and our method offered a high spatial resolution image.

本文言語English
ページ(範囲)35-42
ページ数8
ジャーナルElectronics and Communications in Japan
102
5
DOI
出版ステータスPublished - 2019 5月
外部発表はい

ASJC Scopus subject areas

  • 信号処理
  • 物理学および天文学(全般)
  • コンピュータ ネットワークおよび通信
  • 電子工学および電気工学
  • 応用数学

フィンガープリント

「Three-dimensional imaging of subsurface delamination in carbon fiber reinforced plastic using photoacoustic wave method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル