Three-dimensional recording by femtosecond pulses in polymer materials

Toshiaki Kondo, Shigeki Matsuo, Saulius Juodkazis, Vygantas Mizeikis, Hiroaki Misawa

研究成果: Article

19 引用 (Scopus)

抜粋

Fabrication and characteristics of two-dimensional (2D) and three-dimensional (3D) periodic structures, recorded inside the bulk of negative SU8 photoresist film by multiple-beam interference are reported. The recording was performed by ultrashort laser pulses of 150 fs duration with central wavelength of 800 nm, multiple beams were generated using a diffractive beam splitter. Intensity-dependent photomodification of the photoresist was initiated by multi-photon absorption. The development process removed the exposed regions of resist film, leaving free-standing 2D and 3D periodic dielectric structures. Detailed examination of the samples is presented, which reveals close resemblance between the features of the fabricated structures, and those of the light intensity distributions in the multiple-beam interference fields. The microfabrication method used is demonstrated to be suitable for obtaining of photonic crystal templates. Phase control of the constituent beams allowed to monitor and control the light interference pattern to be recorded. Possibility to record the diamond lattice using this method is examined and discussed.

元の言語English
ページ(範囲)427-432
ページ数6
ジャーナルJournal of Photopolymer Science and Technology
16
発行部数3
DOI
出版物ステータスPublished - 2003 1 1
外部発表Yes

ASJC Scopus subject areas

  • Polymers and Plastics
  • Organic Chemistry
  • Materials Chemistry

フィンガープリント Three-dimensional recording by femtosecond pulses in polymer materials' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用