Trajectory tracking for wheeled inverted pendulum robot using tilt angle control

Danai Phaoharuhansa, Akira Shimada

研究成果: Conference contribution

4 被引用数 (Scopus)

抄録

This study investigated to design the trajectory tracking controller for wheeled inverted pendulum robot using tilt angle control. It introduced as follows; 3DOF model of wheeled inverted pendulum robot was derived by Lagrangian multiplier method. The trajectory tracking algorithm was redesigned in order to track the trajectory by forward and backward motions. The update algorithm is used to move the way point, which is desired position for servo controller. The tilt angle control was designed to control the tilt angle and the robot's motion. Initial condition and simulation result, which were described the initial condition for simulating the motion and the result of the trajectory tracking using the tilt angle control. The result exhibited that the robot can performs to track the trajectory well. However, some errors might be occurred when the robot performs the steering motion but the robot has a function able to perform to the goal successfully.

本文言語English
ホスト出版物のタイトルProceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society
ページ4288-4293
ページ数6
DOI
出版ステータスPublished - 2013 12 1
イベント39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013 - Vienna, Austria
継続期間: 2013 11 102013 11 14

出版物シリーズ

名前IECON Proceedings (Industrial Electronics Conference)

Conference

Conference39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013
CountryAustria
CityVienna
Period13/11/1013/11/14

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

フィンガープリント 「Trajectory tracking for wheeled inverted pendulum robot using tilt angle control」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル