Vector control specialized for switched reluctance motor drives

Noriya Nakao, Kan Akatsu

研究成果: Article査読

2 被引用数 (Scopus)

抄録

This paper proposes vector control specialized for a switched reluctance motor (SRM) drive. Because it is a unipolar drive, a sinusoidal current with a dc offset is applied to each circuit instead of the conventional trapezoidal current. The current consists of dc and ac components which can be identified by their generation of a (virtual) rotor flux and rotating stator magnetic field, respectively. Thus, the vector control system can be developed in the same way as conventional ac machines. The proposed technique provides new mathematical models of SRMs on a rotating reference frame and achieves precise and fast torque response and advanced operations such as linear torque-current control and maximum-torque-per-ampere control. The vector control theory was verified through simulations and experiments.

本文言語English
ページ(範囲)24-36
ページ数13
ジャーナルElectrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)
194
2
DOI
出版ステータスPublished - 2016 1 1

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Energy Engineering and Power Technology

フィンガープリント 「Vector control specialized for switched reluctance motor drives」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル