Vibratory Separation of Conductor-Insulation Mixtures Using Induction Charging

Masato Saeki, Masanori Tukahara, Tetsuya Inoue, Hidehiko Maehata, Satoshi Takesono

研究成果: Article査読

1 被引用数 (Scopus)

抄録

The experimental study of conductor-insulation separation has been performed by means of a vibro-electrostatic separator. The separator consists of a vibratory feeder equipped with two plate electrodes. The separation tests were performed on a sample containing 50% Polyvinylchloride (PVC) and 50% aluminum. The influence of electric field strength and amplitude of conveying surface on the separation efficiency was investigated. The purity of PVC was 99.18±0.05% at the recovery of 93.11±0.91%. The purity of aluminum was 99.72±0.07% at the recovery of 90.65±0.79%.

本文言語English
ページ(範囲)2653-2658
ページ数6
ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
69
10
DOI
出版ステータスPublished - 2003 10
外部発表はい

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 産業および生産工学

フィンガープリント

「Vibratory Separation of Conductor-Insulation Mixtures Using Induction Charging」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル