Wireless sensor system using surface acoustic wave devices

Atushi Saitoh, Toru Nomura

研究成果: Conference contribution

4 引用 (Scopus)

抜粋

A new RFID tag system has been designed by utilizing a reflective surface acoustic wave (SAW) delay line. A shear horizontal mode SAW (SH-SAW) has the unique characteristic of complete reflection at an edge normal to the direction of propagation. This characteristic makes it possible to construct a reflective delay line. The reflective delay line can be used to construct passive sensors that measure from a remote location. In this paper, a reflective SAW delay line is utilized to fabricate a passive sensor and radio frequency identification (RFID) tags. Experimental results showed that the reflective delay lines are very suitable in making SAW RFID tags. Moreover, some applications of the SH-SAW RFID tags are demonstrated for measurement of the acoustic properties of liquids and strain of solid.

元の言語English
ホスト出版物のタイトルICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings
ページ2359-2363
ページ数5
出版物ステータスPublished - 2009 12 1
イベントICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009 - Fukuoka, Japan
継続期間: 2009 8 182009 8 21

出版物シリーズ

名前ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings

Conference

ConferenceICROS-SICE International Joint Conference 2009, ICCAS-SICE 2009
Japan
Fukuoka
期間09/8/1809/8/21

    フィンガープリント

ASJC Scopus subject areas

  • Information Systems
  • Control and Systems Engineering
  • Industrial and Manufacturing Engineering

これを引用

Saitoh, A., & Nomura, T. (2009). Wireless sensor system using surface acoustic wave devices. : ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings (pp. 2359-2363). [5335123] (ICCAS-SICE 2009 - ICROS-SICE International Joint Conference 2009, Proceedings).